esc switch question
Hi, I have three esc's to run tracks and swing on my excavator, they each came with a small on off switch attached. Is this switch necessary or can it be eliminated by soldering two wires together and removing switch?
Thanks Terry |
Re: esc switch question
The switches can be eliminated like that with no problem.
I would leave a switch installed on whichever one is powering the rx, just so the machine won't go live as soon as you connect a battery. Also did you pull the red rx leads on the non-power escs? |
Re: esc switch question
Thanks for your reply Frizzen, I did cut the redwire on all three, I have another esc for my pump motor that does the receiver charge.
Terry |
All times are GMT -4. The time now is 09:11 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.