esc switch question
 

Hi, I have three esc's to run tracks and swing on my excavator, they each came with a small on off switch attached. Is this switch necessary or can it be eliminated by soldering two wires together and removing switch?
Thanks
Terry

Re: esc switch question
 

The switches can be eliminated like that with no problem.

I would leave a switch installed on whichever one is powering the rx, just so the machine won't go live as soon as you connect a battery.

Also did you pull the red rx leads on the non-power escs?

Re: esc switch question
 

Thanks for your reply Frizzen, I did cut the redwire on all three, I have another esc for my pump motor that does the receiver charge.
Terry