![]() |
|
Electronics tech Anything to do with the electronics in a model. Lights, Radio, ESC, Servo, Basic electrical. |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
I'm almost there!!
![]() ![]() I started looking at the aux channels. It said NULL next to all of them. That's when I finally clued in , null is off! Ch 5 is the pump Ch6 is left track Ch7 right track Each channel has various choices besides null. Thro hold, gear, pit trim, Hov thro, Hov pit, I got the tracks running by placing ch6 on Hov pit and ch7 on Hov thro. The pump ch5 is a little more complex. Out of the five choices the one that works best is thro hold. Problem is, with the switch off, the pump runs backwards ![]() ![]() So I think I'm almost there. I need to adjust something on the thro hold setting? I'm thinking the end point so switch off is not reverse and switch on is normal? It's been a great day none the less! progress made! ![]() |
#2
|
||||
|
||||
![]()
That's it! I am one happy camper!
![]() Not only is my hoe running again, I learned a lot about this radio! ![]() I adjusted end point and all is good now. Pump only runs in correct direction. So happy..... Time to go play in the backyard. ![]() Thank you everyone for your help and info. ![]() Mario |
#3
|
||||
|
||||
![]() Quote:
![]()
__________________
Nathan |
#4
|
||||
|
||||
![]()
Well.... Not a pro but no longer a village idiot with radios anymore
![]() What a great feeling ![]() Mario |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|