![]() |
|
Construction Equipment If it digs, pushes, hauls dirt "off road" post it here. |
![]() |
|
Thread Tools | Display Modes |
#41
|
||||
|
||||
![]()
Clyde I just hit it with a quick coat for pics. I hope to blast and paint when done .
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#42
|
|||
|
|||
![]()
ahh thats a good idea then you don't have to fight the rust like i do lol
__________________
I built this thing and have it working now what do I do with it? |
#43
|
||||
|
||||
![]() Quote:
![]() I'm thinking of leaving the tracks wide instead of cutting the 1/2" off to bring to scale width . Kinda looks like a wide track . I'm going with the single motor drive , just to see if it is possible in RC . I got pretty much figured out , just the time and parts ![]() ![]() and a quick peek of this ![]() ![]() I still have to machine the shaft and bolt together to test flow and pressure . only non calculated variable is the motor ( not sure if it has what I need ) but we'll see ![]() ![]()
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#44
|
||||
|
||||
![]()
I'm glad your going with one motor and steering clutches, you can be the guinea pig to see if works.lol Any more progress on the pump?
__________________
Joe |
#45
|
||||
|
||||
![]() Quote:
![]() ![]() ![]() ![]()
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#46
|
||||
|
||||
![]()
well I got my pump working
![]() ![]() ![]() ![]() ![]() IHSteve
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#47
|
|||
|
|||
![]()
Nice work on the pump - a vane pump you say. Wow, nice work. Would a press fit bronze SAE863 collar on the shaft help seal it? Are you planning to make the valves? If so, are you going to do a closed or open hydraulic system?
|
#48
|
||||
|
||||
![]()
Nice progress Steve. Pump looks good!
Those HD brand servos I told you about on the phone don't like to sit for a long time under load, they have so much holding strength that they burn up from heat. So, they probably would be good to move/hold valves.
__________________
Scott "No load is too Small" |
#49
|
||||
|
||||
![]() Quote:
I'm might try something off the shelf first . not sure yet on open or closed . as for seal , I just used what I had laying around to try it out . Quote:
thanks Scott , any servo holding a load for a long period of time is not good for it , I would think . I'll cross that 1 when I can get to it .
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#50
|
|||
|
|||
![]()
Steve,
looking good man i must say u r crazzzyyy!!!!!!!!! LOL |
#51
|
||||
|
||||
![]() Quote:
![]() ![]() ![]() ![]() thank you Greg
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#52
|
||||
|
||||
![]()
Any progress Steve?
__________________
Joe |
#53
|
||||
|
||||
![]()
dozier lookin good keep on fabbin
![]() |
#54
|
||||
|
||||
![]()
only a little , Joe , welded up 1 track frame tonight had to get 68 steel wheels to the powder coater now got to finish the hubs for them and the next batch . my rollers will be hard ( cummins cam followers
![]() thanks , Oh I will ![]() ![]()
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#55
|
||||
|
||||
![]()
I used oiled bushings, no wear yet.
__________________
Joe |
#56
|
||||
|
||||
![]()
yea I'm leaning more toward them It's not like the full size where it take a couple hrs to change 1 .
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#57
|
|||
|
|||
![]()
well we need pics!!!!!!!!!!!! lol i am wanting to see if the one motor and planitarys on the outside is going to work I hope it does cuz i have a few ideas
__________________
I built this thing and have it working now what do I do with it? |
#58
|
||||
|
||||
![]() Quote:
![]() ![]()
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#59
|
||||
|
||||
![]()
here you go Henry
![]() ![]() ![]()
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#60
|
|||
|
|||
![]()
Nice work rollers take forever to make lol
__________________
I built this thing and have it working now what do I do with it? |
![]() |
Currently Active Users Viewing This Thread: 9 (0 members and 9 guests) | |
|
|