Benny's R Model Mack

[Lmackattack]

Truck is look in good. Yes that 3D texture is pretty harsh!

when I built my 3D printed Macks I had to notch out the passenger side of the cowl so I could get the air cleaner pipe thru the hood. I used the late 70s style twin tube air cleaner and needed the room for both tubes. I think I also had to enlarge the hood opening as well?

I think there were about 5 different cowls for the R model cab depending on the model and what hood was being used.

R
DM
U
superliner

all have a different cowl panels

if you ever see a RS700L Mack with a v12 under the hood look at the cowl. it will have extension panels added to the cowl.

[Exclusive RC]

started manually making the grill...





Printed some mirrors,


designed and assembled my daytons..



unfinished next to rc4wd "dayton"




mocked up fender mirrors..






showing off some of Benny's Brazing skills


developed my own camel back suspensions true to the R Model





with all the hardware installed..

[Exclusive RC]

worked on some more details,

door handles


seat belt buckles


Passenger Seat






driver side seat