LilGiantsConstrCo

[Lil Giants]

Here's a video for Tom.
https://youtu.be/UfXzAi95Y2g

If you're wondering how the hyds are hooked up? I just tee'd right into the hyd lines that go to the dump cyls for B50 dump box. Pull down stick (lowers B50 box) to circulate oil flow to valve on pup & operate 3pos switch (Aux 1) on radio.

Had about 9 gorgeous days of 25C to be outside this past week Mario, Wed afternoon 3 tenths rain & today heavy cloud, windy & 10C BRRRR! Sun just came out now & no wind, go dig in the pile for a couple hrs before dark.

Got a bit of rebuild to do... gotta get some eaves put on the shop this summer!



Idiot foreman ofcourse had to make some potholes in the mud yesterday.



Last night I tore into the ol' JD dozer to figure out what the problem was with one of the track motors, a couple of broken spur gears, easy fix - it's running again. Izzybilt dozer has been working great to level windrows from bellydumps, but the angle should spread better... it's been yrs since I last run this dozer!



Off to work!

[Wiskybilt]

Originally Posted by Lil Giants

Last night I tore into the ol' JD dozer to figure out what the problem was with one of the track motors, a couple of broken spur gears, easy fix - it's running again. Izzybilt dozer has been working great to level windrows from bellydumps, but the angle should spread better... it's been yrs since I last run this dozer!



Off to work!

Bringing up another model I haven't seen for a while, your Mamouth tipper truck. The last video I saw of it, it looked like your bed dumped without turning the steering all the way left. Did I miss somewhere in your threads that you upgraded the control and ditched the +1 system that Tamiya used. I have one and I ordered the FS-GT3B 2.4G tx/rx for mine. Just waiting for it to come in. Hoping I can figure out the swap.