Dragline Crawler Build

[Rvjimd]

Tom,

Good idea on the brass bushing. I have basically checking every one I drill. I had been thinking if the cap in the drill guide starts to hog out I would make one in steel, but a brass bushing sounds easy.

I was getting crazy drilling holes and had to do something different for a while! If all the side rails turn out okay I will try to make them in steel to add a bit of weight. I'm thinking I may also add some lead ballast where I can as well.





Jim

[Car5858]

I am also available to help with cad drawing if needed. Just send me a PM with the dimensions you need.

Nice work and I will be watching this thread for the duration

[Rvjimd]

Car5858, thanks for the offer! I'm using some photos of drawings that .steve posted on another crane build, for now that is getting me by.

Tom,

This picture is for you, I had to adjust it after I put the bushing in the cap, but it makes it easier to see and should last at least thru the remainder of the pads I have to drill.



Here is a side view of a drilled track pad.



]

Jim