JBC limited NZ

[andyathome]

I have been told the same about the fines shute.
we have a guy at work who used to repair them in South Africa and he suggested a sliding mech under the hopper slots that I can adjust to suit the material im crushing and that the shute must be full to work properly. And apparently it needs to lift the rocks on the jaws when crushing other wise they will jam in place.
I do intend to use a toothed or a vee belt but I had the seals ( o rings ) lying around so for initial testing and a zero budget they will have to do for a couple of weeks.
this has been a bit of a learning curve but still fun.
by the way Ive also learnt that you dont put a large plastic handle of a screw driver into it to see what happens.
I now have a large square shanked handle less screw driver and lots of yellow plastic bits.

cheers andy