![]() |
|
Construction Equipment Tech Hydraulics, Electronics, General Engineering, ect in constr equip |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Another thing I forgot to add cosworth is that I found Firgelli will promptly help out with design questions using their actuators. I emailed Ian Greig at Firgelli (found his details here on RC T&C) with photos and digitally measured loads for the Firgelli actuators I proposed using and asked his opinion. He assessed my project and also put it to his engineering dept and came back with the answers next day. Another reason I'm using screw jacks - Firgelli were happy to offer advice on their products and they are in Canada - easy communication. Hope you get it sorted.
|
#2
|
|||
|
|||
![]()
Its a big call to ditch all work and start again.
I built my rc dozer after a lot of looking here at various builds. knowing nothing about esc,s and receivers really , spoke to Ian at firgelli via email and was assisted with the right rams for the job. must be three years and dozer still going strong, but have stripped one screw drive and it was my fault. once I learnt a little more on how things in the RC world worked I was more confidant playing around with the hydraulic side of things. The more time you spend thinking about things it becomes clearer what is wrong. If I was you I would drop the pump speed to almost nothing and work on one set of cylinders at a time, get them working as they should then move to the next, dont try to fix everything at once. just my thoughts cheers andy |
#3
|
|||
|
|||
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|