Stahl Dozer

[Lil Giants]

"all the way out"? English is not their native tongue, you have to be much more specific. Total length at extended stroke. I'm thankful that their able to communicate with us at all!

When buying hydraulics, what Stahl or TTM or Wedico sells is made by Leimbach and this is their www addy http://www.leimbach-modellbau.de/start.html

Scroll down left header to Hydraulik, fourth down Zylinder

(K) is bore
(B) outside cyl dia
(L2) length of retracted cyl
(HUB) stroke, add that to L2 for total length extended

Technische Daten:
(K) (B) (L2) (HUB)
H0725 7 mm 11 mm 58 mm 25 mm 34,6 N 28,3 N M3
H0750 7 mm 11 mm 83 mm 50 mm 34,6 N 28,3 N M3
H0775 7 mm 11 mm 108 mm 75 mm 34,6 N 28,3 N M3
H07100 7 mm 11 mm 133 mm 100 mm 34,6 N 28,3 N M3



As you can see, they don't stock that specific length extended stroke. But if that's exactly what you want, they will custom make it for you at extra cost.

My Cat colored dozer uses 7x50 and the JD dozer has 7x25 for tilts.

[JAMMER]

Joie thank you very much for that information but I told Herr Thiel who speaks english that they were for the blade on the dozer to tip the blade forward and back on it to replace the two dummy ones. The ones they sent were 233 mm stretched that's as long as the dozer with out the blade, Hello.

[JAMMER]

I put these in the wrong place before







I just stuck it together with acouple of screws to see if all the parts are there. Now I can get an Idea what it is going to take to make it a high track.Ed