Adjustable goose neck for RC4WD lowboy

[Northern Farmer]

Originally Posted by Lmackattack

I was watching a few review vids on the RC4WD lowboys and it looks like the rear axles are solid? maning that if the LH wheel turns so does the other side....is this true? will a tamiya axle fit in place to solve this issue?

Correct both wheels on the same axle turn together.
I run these axles on my dump trailer and the wheels turn independently.
https://www.ebay.com/itm/Samix-Alumi...gAAOSw5cNYR4fH

Underside of the RC4WD lowboy

[bigford]

I pulled the hex pin on the left side of the 3 axles
And haven't had a problem yet

[Lmackattack]

Originally Posted by bigford

I pulled the hex pin on the left side of the 3 axles
And haven't had a problem yet

I was just suprised to see that the trailer that hauls such heavy stuff had locked axles. lots of drag in a turn from non powered locked axles

[Northern Farmer]

Originally Posted by bigford

I pulled the hex pin on the left side of the 3 axles
And haven't had a problem yet

Thanks for the tip Mark I’ll do this