My first try to build a trailer...

[Izzy]

to lengthen the axels you have a few options.
1 - cut the tubes in half. Thread the internal of each half. Use all thread and cut lengths. thread into the tube & adjust to right length. And lastely use a slightly larger brass tube to slide over top to cover up the thread section.

2 - buy longer sections of tube from PMD - he can special order nearly any length - they take a little while to come in as he buys them pre made.

3 buy more standard length axels, which PMD ussually has on hand, and cut and splice as before but without the brass tube. A little easire to use a long set screw rather than messing with the all thread.

as for the wheels - Wedico expects the plastic half cups that attach the leaf springs to ride against the inside of the hubs. If you need to make a spacer of some plastic or brass tube to match what you want.


Hope this helps
Izzy

[Azorean]

Thanks, that really help me, sorry to bore you guys whit that kinda stuff, but im new in this...

will be expecting for hollidays to end to get back in the trailer eheheh.

Azorean

[Azorean]

At last some time to do some work...

Already get the axels whit the rigth size and mount my wheels.

Hope to do some more this week.

[Azorean]

Some more work done today...

[Azorean]

Did some more work this weekend.

Here´s some pictures...