|
|
|||||||
| Electronics tech Anything to do with the electronics in a model. Lights, Radio, ESC, Servo, Basic electrical. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
08-02-2011, 10:01 AM
|
||||
|
||||
Re: Lipo info
I would not really waste my time with 2200mah lipos, I have been using these:
VENOM 7.4v 5400 LIPO BATTERY Did a truck show over Fri, Sat & Sun and changed my first battery at about 11.30 on saturday and had been running with the lights on most of the time. Would estimate about 4-5 hours running time and 1 1/2 hours to recharge! http://cgi.ebay.com.au/ws/eBayISAPI....=STRK:MEWNX:IT
__________________
Regards, Bill Randall Perth, Western Australia West Coast Remote Control Trucks Inc It's time to get out of the rut and get into the fun! Come visit us at To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. 
|
|
#2
08-02-2011, 10:40 AM
|
||||
|
||||
|
Re: Lipo info
I agree with Paul , there are plenty of good deals to find on the lower amp/hrs LIPO's
especially around the 2000 to 2200 mAh range . I use them myself too . If you want higher capacity , you just run 2 or 3 of them in parallel .
__________________
(Wild)-Willy CustomRCmodels
|
|
#3
08-02-2011, 01:50 PM
|
||||
|
||||
Re: Lipo info
I build Helos for people who want the UH-1 Huey fuselage and nav. lights.
I have had 2 LiPos go up in smoke (out of 30 or so) and they were connected to nothing! I use the bag just to be safe.
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
