![]() |
|
Construction Equipment Tech Hydraulics, Electronics, General Engineering, ect in constr equip |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() Quote:
I bought it ready built from a guy called Jo Smith in the UK via the http://www.rc-trucking.com/ forum, he sold it to me with an esc to control the pump via the fifth channel and a small German dual esc to run the tracks, that I burnt out in five minutes. As far as I know the machine is a Stahl model with the bucket from their wheeled loader, the pump and Hydraulics are Leimbach. other than that I do not know any more about it over the last few months I have been experimenting with several dual esc's and eventually settled on a Novak M2 Dig Dual Brushed ESC and this last week the pump esc with the Servonaut BMA pump controller, which I have now set to turn the pump off in 1.5 seconds after the sticks have been centred, I even tried a Tamiya DMD unit to try and drive the tracks but it was too big also tried a sabre tooth dual esc but the steering in reverse was reversed so went with the Novak as far as I know the tracks are the stock length and I have had to do a temporary repair to one of the because a couple of E clips have come out and I am waiting for new ones ( put some m3 bolts in as a temporary measure). here is a picture in as bought condition ![]() Jens, Thanks for the translation on the Scal4x4 forum Last edited by Brel; 10-20-2011 at 06:23 AM. |
#2
|
||||
|
||||
![]()
It seems to be a hybrid:
- body from the tracked loader - under carriage from the dozer - arms/ bucket from the Cat 966 Pretty cool and unique.
__________________
Emil G | MFZ Blocher Fendt 926 | RC4WD Volvo EC480 excavator | Carson LR 634 | Kenworth 6x6 hauler | Kenworth 6x6 dtrk My channel: To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Construction site on Facebook: To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Pictures on Instagram: To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#3
|
||||
|
||||
![]()
it would seem to be that way, but it has got better to run after installing the ServoNaut MBA pump module, with the leimbach pump and tank in the machine
Last edited by Brel; 10-21-2011 at 01:58 PM. |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|