![]() |
|
Highway Trucks and Trailers On road trucks and trailers single and twin axle trucks. |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
I second that! It looks like its molded in the plastic
![]()
__________________
Brian RIP FreddyGearDrive 2-12-59/12-19-11 |
#2
|
||||
|
||||
![]()
Hello
![]() ![]() Thank you for the nice compliments. ![]() @glorydays24 Thank you. Yes, the sun visor, I myself have built. Have you made of plastic. There is a lot of sanding and filling. ![]() ![]() ![]() @Bsorenson79 The rear hubs are from Verkerk Modelbow. Here is the link to it. click me @Brian in PA Thank you. The caps I made of plastic details. I have removed the original strip on the hood and ground down the middle. The new detail is produced on a 0.5 mm thick and 14mm wide strips. The 5 bars to 1 mm wide and are each 1mm apart and 0.5 mm high. Left and right to remain still for the 2.5 mm rivets strips. The rivets are made of brass and have a head of 1.6 mm. It went with me now a little further. Unfortunately, one has to work only limited time to tinker. ![]() First, my good friend my new air filter was filmed on a lathe. Are you fully made of aluminum material. The hoses for that I'm bent out of plastic pipe and O-rings drawn. The entire tube was then subsequently Covered with black shrink tubing. The new fuel tank, I made tanks from the old orginal Tamiya. I removed the first thing the Chrome and have fixed glued the end caps. Everything was Stuffed several times and ground. The new tank straps are fixed by the company and keep the Wedico tanks to the frame. When Sleeper I built a new rear wall. She is also the result of plastic and was grounded after the fitting several times and leveled. The rivets are the same as from the hood. You have a head diameter of 1.6 mm. Also have 2 handles and 4 beautiful taillights found your place on the back wall. Now, there are first pictures Greetings Sven
__________________
our page on facebook " To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. " Last edited by Crossy; 02-05-2012 at 04:21 PM. |
#3
|
||||
|
||||
![]()
Hi Sven,
it looks good, I love the fuel tanks Günther ![]()
__________________
Günther To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. from Lübeck, Germany |
#4
|
||||
|
||||
![]() Quote:
|
#5
|
||||
|
||||
![]()
Nice back, simple and efficiant. Good job with the rivets.
![]() I would think about the backlight to bring it up the top. @ Bsorenson79: I cn help - you will get them in a german shop: http://www.fechtner-modellbau.de/shop/index.html Regards Günther
__________________
Günther To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. from Lübeck, Germany Last edited by gungunhl; 02-10-2012 at 04:18 AM. |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|