mixing channels for hydro pump

[rcguyfarms]

any success on this at the show?

[SmallHaul]

Brian, I looked at the online manual for the VG 6000 radio and it doesn't look like it has any programmable mixes.

You would need a"mix1" and "mix2" for you loader one for bucket and one for lift.

For example:

mix1 would be throttle lift (master) to channel aux1 pump (slave)

mix2 would be rudder bucket (master) to channel aux1 pump (slave)

So, the radio needs a programmable mix for each radio lever that moves hydraulics.

Spektrum dx7, dx8, JR9303, JR9503 & JR 10x for example have 3 or more programmable mixes.

[Brian in PA]

Originally Posted by SmallHaul

Brian, I looked at the online manual for the VG 6000 radio and it doesn't look like it has any programmable mixes.

You would need a"mix1" and "mix2" for you loader one for bucket and one for lift.

For example:

mix1 would be throttle lift (master) to channel aux1 pump (slave)

mix2 would be rudder bucket (master) to channel aux1 pump (slave)

So, the radio needs a programmable mix for each radio lever that moves hydraulics.

Spektrum dx7, dx8, JR9303, JR9503 & JR 10x for example have 3 or more programmable mixes.

Thanks Scott!

[Brian in PA]

Originally Posted by rcguyfarms

any success on this at the show?

No Scott. Joe looked at it and Scott came up with it not working with this radio. I have made some calls to robot market place and some other sources for a external (mixer) but it looks like I need a different radio