Truck steer type lift axle

[fuzzy]

i am tring the same axle to. removed diveshaft and pushed it and it work. i have russisloud air ride, have to mill frame mount so it sits higher on frame to get the right pitch for the axle to work. i have two tamiya red shocks to bring it back to center.will have to trim air bags some to clear shocks. have not tried the lift part yet, but i have some ideas. need to make a jig to hold axle in place with i cut it. then come up whit a hump that will hold lift servo and clear driveshaft.

[Brian in PA]

Jim, you could use a front(steering) axle for this. The axle should clear the drive shaft.