|
|
|||||||
| Construction Equipment If it digs, pushes, hauls dirt "off road" post it here. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
10-22-2012, 10:17 PM
|
||||
|
||||
Re: 990 cat loader (Earl Shiebbed)
actually it ran 40 hrs before the break down
  Yea I forgot to pick 1 up when I was at the dealer for a battery for the 247B and my paint always in a hurry 
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. 
|
|
#2
10-23-2012, 07:48 PM
|
||||
|
||||
|
Re: 990 cat loader (Earl Shiebbed)
Quote:
 . nahhhhh, the old girl would last longer than that! Bet ya can't get one at the dealer with a Canadian maple leaf on it!  I'll get ya one. You are now on my Xmas list  Mario Last edited by Supermario; 10-23-2012 at 07:50 PM. Reason: Typo
|
|
#3
10-23-2012, 07:59 PM
|
||||
|
||||
|
Re: 990 cat loader (Earl Shiebbed)
well it turns out the valves are the culprit
I knew it would happen steel wearing on aluminum with piss poor tolerances . at least the filter will catch the particles till I get my valves finished . I also turned the pump around so the belt is at the back of the machine as opposed to between the main motor and pump motor . should be easier to change the belt now . No , no maple leaf on our hats here .
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
#4
10-24-2012, 04:09 PM
|
||||
|
||||
|
Re: 990 cat loader (Earl Shiebbed)
o-rings came in after lunch for the filter . so I took a few min and put oil in an gave er a go
 back in bizz now will not get a vid till this wknd in the rubber pit I'll have to tie up 75% of it's HP just to make it look like I'm workin it hard
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
#5
10-24-2012, 06:08 PM
|
||||
|
||||
|
Re: 990 cat loader (Earl Shiebbed)
Glad to hear she's back up and running
. You must have brought it to a CAT dealer to get such a quick repair timeMario
|
|
#6
11-18-2012, 09:34 PM
|
||||
|
||||
|
Re: 990 cat loader (Earl Shiebbed)
lil bit of me time today
 got the front fenders and light post fabed up . they came out much better in brass then aluminium welded I may mill out my own lights . these look like poo  
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
