Kenworth 850 Off Highway

[Exile Trucking]

Good job on the nuckles. Two ?s how big of a block did the nuckle start as and do u have a 2 or 3 way vise for the mill. And please don't tell me you do all that great work with a regular vise. It would just put me to shame

[RCP57]

Originally Posted by Exile Trucking

Good job on the nuckles. Two ?s how big of a block did the nuckle start as and do u have a 2 or 3 way vise for the mill. And please don't tell me you do all that great work with a regular vise. It would just put me to shame

I have a Soba 4" vice. It has swivel base(I've yet to use it) and some V notches in one jaw. That's it, nothing too fancy unfortunately.

The spindles started out as one block about 2"x1 1/4"x1 1/2".

Lunch is over....back to work! Should have the front finished in a couple hours.

Reg

[RCP57]

Well I took a short break because the sun was out and I was feeling guilty for spending the whole afternoon in the shop but after that I got it working. I had to move the servo mount up from where I had originally planned to put it but as it turns out it is now mounted where the steering box is on the real truck making it look more realistic. The truck is starting to look like a real 40 year old truck. Every day I build something and weld it on only to cut it of and weld it on somewhere else the next day! I still need to add another leaf to the pack(there is 12 and should be 13) and then make fake U bolts but I'm happy with my progress.

Thanks for lookin...












http://youtu.be/9WI4r7hD1YQ