S&M Trucking open for bizz nizz !!!

[Supermario]

Thanks Big John. I love these lights. The company who sells them are great to deal with and my first order came with a 10 bucks off coupon and free shipping over 40 bucks on my next order
Really good variety on colors, sizes, lengths .....etc.

http://www.modeltrainsoftware.com/bl-214f.html


Thanks Keith. I can't wait either
I'm like a kid at Christmas waiting for the tree to be lit up for the first time after decorating...lol

That's a great suggestion Whitewolf .
I need the shrink tube to seal and isolate the solder connection for the 2 main wires which will connect to the light relay.


Glad you like Nathan, I'm very happy how it looks. I think the combination crazy glue and then silicone should hold them all in place very well.... And yes, I like clean looking wiring, not birds nest wiring

These lights have a 5-12 volt working range. I plan on connecting them to the aux relay on the SS Tronix board which has a 5 volt output. Not battery voltage of 7.2
Why do you ask? Am I forgetting something? I'm going to connect all 20 LEDs in parallel to a relay that can handle 2 amps or 60 led. I should be ok right???


Hey Dwayne.

No luck at the Source. The smallest they have is 1/4" tubing which is way too big for magnet wire. Good news is, I found some today at a local electrical shop! I'm good to go! No more hold ups!

Thanks Dabomb6988 . I'm very anxious to not only see it lit up, I've enjoyed the build but it's time to finish!


Thanks Rccrazy523, I like the unique cab that pro builder made for us and the spectacular paint job he did.


Mario

[glorydays24]

Originally Posted by Supermario

Thanks Big John. I love these lights. The company who sells them are great to deal with and my first order came with a 10 bucks off coupon and free shipping over 40 bucks on my next order
Really good variety on colors, sizes, lengths .....etc.

http://www.modeltrainsoftware.com/bl-214f.html


Thanks Keith. I can't wait either
I'm like a kid at Christmas waiting for the tree to be lit up for the first time after decorating...lol

That's a great suggestion Whitewolf .
I need the shrink tube to seal and isolate the solder connection for the 2 main wires which will connect to the light relay.


Glad you like Nathan, I'm very happy how it looks. I think the combination crazy glue and then silicone should hold them all in place very well.... And yes, I like clean looking wiring, not birds nest wiring

These lights have a 5-12 volt working range. I plan on connecting them to the aux relay on the SS Tronix board which has a 5 volt output. Not battery voltage of 7.2
Why do you ask? Am I forgetting something? I'm going to connect all 20 LEDs in parallel to a relay that can handle 2 amps or 60 led. I should be ok right???


Hey Dwayne.

No luck at the Source. The smallest they have is 1/4" tubing which is way too big for magnet wire. Good news is, I found some today at a local electrical shop! I'm good to go! No more hold ups!

Thanks Dabomb6988 . I'm very anxious to not only see it lit up, I've enjoyed the build but it's time to finish!


Thanks Rccrazy523, I like the unique cab that pro builder made for us and the spectacular paint job he did.


Mario

Thank you so much Mario, they have everything I need to have a rolling christmas tree. LOL!!!

Big John

[1985 kenworth]

i agree with you mario..time for me to get cracking too and finish my builds also

[Supermario]

So I've just run into a set back on the Black Passion build
I got the cab skirt lights all done, tested and looking fine. I attached them to the cab mounting plate and then that's when trouble came up.

When marked out the holes for the lights I used the same spacing as the sleeper lights to make it look right. Well, I just discovered I have one led on each side which is in the exact same position as the front mounting brackets for the steps! no room for the LEDs ! I never seen it coming and I'm ^}%]*]% I missed that! Lesson learned. I was too focused on just the part and not where it goes!

Plan B - I need to screw the step to the vertical edge of the mounting bracket and remove the horizontal edge will work. Sad part is I have about 4 inches of slack because of the light wires for the step lights which are glued on! so I have to drill the steps while still hanging or mounted. The whole fix is going to be awkward as ****

It's been a rough day. I was ready to start dealing with the problem right away but thought.... I'm rushing this. I'm upset I won't get it done as quick as I wanted but hey, this build has never been rushed and had no big problems. Now I rush a little and look what I get!

So , I'm on a shutdown for the day! Grabbed a Bud out of the fridge, kicked back on the couch and I think I'm gonna watch the nationwide Bristol race and start fresh tomorrow.

Have to turn the brain off for a bit....lol. Thanks for listening

Mario

[Supermario]

All right, I'm done with my freak out session. Couldn't help myself but get back at the build. I was all upset for nothing! Took about an hour to cut and modify the step bracket and the cab plate is now installed and fits perfect.

Sorry bout the drama queen complaining

Back to building........

Mario