Azonic Hitachi 470/Bell B50D

[RCLogger]

Originally Posted by Lil Giants

That looks fantastic Kalle!

No doubt it'll be great for digging & better yet scooping rocks!

I can put it to use right away, send it to me & then make another for yourself.

I've got all the pieces for another mass GP bucket for a partial trade with you... no doubt your friend will do a finer job of tig 'ing it all together.

My first thought when I saw this bucket is " JOE IS GOING TO DO SOMETHING IN HIS PANTS WHEN HE SEE's THIS BUCKET "

That is one nice bucket

[rc13]

Hi, Its Eddie. I was talking to you on youtube about the quick coupler.
I was contacting you to ask about the extra hydraulic solid tubing that you installed. I read a thread where you said that you used 4 x 0.5 brass tubing. I am going to add an extra valve and the hydraulic lines to my Vario 850D in a similar way to yours.
So you soldered the tubing to the fittings?
Did you also build the small squared blocks that are connected to the brass tubing?
Also, did you build the small squared pieced that hold the solid tubing to the boom?
It is very nice how you set up yours.
Any suggestions are much appreciated.
Thanks,
Eddie

[Azonic]

Originally Posted by Lil Giants

That looks fantastic Kalle!

No doubt it'll be great for digging & better yet scooping rocks!

I can put it to use right away, send it to me & then make another for yourself.

I've got all the pieces for another mass GP bucket for a partial trade with you... no doubt your friend will do a finer job of tig 'ing it all together.

Thanks Joe, it turned out really good!

Hah! I bet you could have great use for it, i can probably make one for you if you really want to!

Originally Posted by JAMMER

Kalle very nice looking rock bucket keep up the good work. Ed

Thanks Ed!

Originally Posted by cdm

love that bucket. looks like the geith front edge.

http://www.geith.com/Graphics/rf58%2...front%2010.jpg

Thanks!

Yes they are quite similar.

Originally Posted by RCLogger

My first thought when I saw this bucket is " JOE IS GOING TO DO SOMETHING IN HIS PANTS WHEN HE SEE's THIS BUCKET "

That is one nice bucket

Haha! He probably did!

Thx!

Originally Posted by rc13

Hi, Its Eddie. I was talking to you on youtube about the quick coupler.
I was contacting you to ask about the extra hydraulic solid tubing that you installed. I read a thread where you said that you used 4 x 0.5 brass tubing. I am going to add an extra valve and the hydraulic lines to my Vario 850D in a similar way to yours.
So you soldered the tubing to the fittings?
Did you also build the small squared blocks that are connected to the brass tubing?
Also, did you build the small squared pieced that hold the solid tubing to the boom?
It is very nice how you set up yours.
Any suggestions are much appreciated.
Thanks,
Eddie

Hi Eddie,

Yes, 4x0,5mm tubing was used, i have made my own fittings to fit the connectors then soldered them, i think there are pics of it in my thread.

Also the square ones are made by me as well, also the holders for the tubes.

Have a look back in my thread and you might see what i did.

[MitzuRazing]

That was one bad *** bucket
I like it

[rc13]

Kallie, Hello and thank you for the info. Hopefully someday soon I will post some pics with my machines.... And yes I agree with the post before me about the bucket. That is a sweet bucket!!!!!
Thanks,
Eddie

[Azonic]

Originally Posted by MitzuRazing

That was one bad *** bucket
I like it

Thanks, its quite bad yes!

Originally Posted by rc13

Kallie, Hello and thank you for the info. Hopefully someday soon I will post some pics with my machines.... And yes I agree with the post before me about the bucket. That is a sweet bucket!!!!!
Thanks,
Eddie

Your welcome, you should start a thread about your equipment!


I borrowed a spotwelder from my friend and put the protection plates on the bucket, now its done, i did some digging today in some hard frozen snow, it worked really good!

[rc13]

Originally Posted by Azonic

Thanks, its quite bad yes!



Your welcome, you should start a thread about your equipment!


I borrowed a spotwelder from my friend and put the protection plates on the bucket, now its done, i did some digging today in some hard frozen snow, it worked really good!

Yes I will start some threads some day hopefully soon. Thank you