Tonka Conversion

[rsd53]

Originally Posted by RCP57

If you look at the pictures closely it appears that the axles are already drilled for cross pins.

You know, I believe you're correct! Thanks for pointing that out to me.

[RCP57]

No problem!

[SmallHaul]

This is how i attached the wheels on my first tonka conversion.

[rsd53]

I saw this in your build photos. It looks like there is a brass bushing inside the tire, that is glued in? I looked at the axle you recommended, but need to know the size of the nut to put on the first tire and the next for the outer. also, I am waiting for a response as to size of the pin.

[SmallHaul]

Yes, there is a brass sleeve glued into the plastic wheel to provide a hard/solid surface for the axle to sit in.

[rsd53]

Can you provide me with any information on the fasteners you used?

[SmallHaul]

i used metric screws, tamiya semi truck hardware, modified tamiya high lift springs, aluminum U channel, aluminum angle stock.