RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Ag and Industrial Equipment and Buildings > Construction Equipment > Construction General Discussion

Construction General Discussion General questions


Reply
 
Thread Tools Display Modes
  #1  
Old 05-15-2017, 11:05 PM
honda3 honda3 is offline
Newbie
 
Join Date: Dec 2016
Posts: 69
honda3 is on a distinguished road
Default eagle mach parts

So where do i get parts for my 360l? I see that rc4wd has a few items but what if i wanted parts for my cylinders or things like that? I don't currently need anything was just wondering for future use. Also where is a good place to order hydraulic cylinders ready to go? I was wanting something powerful for my dump truck. Thanks again guys
Reply With Quote
  #2  
Old 05-15-2017, 11:21 PM
Northern Farmer's Avatar
Northern Farmer Northern Farmer is offline
Big Dawg On The Bone
 
Join Date: Jul 2015
Location: Montreal QC
Posts: 1,513
Northern Farmer is on a distinguished road
Default Re: eagle mach parts

For parts contact Tang directly at Eaglemach@foxmail.com
https://www.aliexpress.com/store/gro...608.0.0.qMKjBl

Check out Magom for cylinders
http://www.magomhrc.com/en/13-hydraulic-parts
Reply With Quote
  #3  
Old 05-15-2017, 11:32 PM
Northern Farmer's Avatar
Northern Farmer Northern Farmer is offline
Big Dawg On The Bone
 
Join Date: Jul 2015
Location: Montreal QC
Posts: 1,513
Northern Farmer is on a distinguished road
Default Re: eagle mach parts

Premacon also has a large selection of hydraulic parts.
http://shop.premacon.com/index.php?c...62958e5e9a1d0a
Reply With Quote
  #4  
Old 05-16-2017, 07:17 AM
honda3 honda3 is offline
Newbie
 
Join Date: Dec 2016
Posts: 69
honda3 is on a distinguished road
Default Re: eagle mach parts

I have a magom cylinder on my truck now and it is very inconsistent. Sometimes it wont lift at all, Other times it will not extend to its full stroke. Everything looks good on the inside, not sure what to do at this point.
Reply With Quote
  #5  
Old 05-16-2017, 11:25 AM
sparkycuda's Avatar
sparkycuda sparkycuda is offline
Journeyman
 
Join Date: Aug 2010
Location: English, IN
Posts: 698
sparkycuda is on a distinguished road
Default Re: eagle mach parts

Often when a cylinder is not consistent , it is air in the system. It can be trapped and cylinder needs to be purged. Or there can be a crack in a line or tank low on oil. If you saw no apparent internal problem, check the rest of the system.
__________________
Big iron is awesome!
Reply With Quote
  #6  
Old 05-16-2017, 10:43 PM
honda3 honda3 is offline
Newbie
 
Join Date: Dec 2016
Posts: 69
honda3 is on a distinguished road
Default Re: eagle mach parts

Thanks for the help Ken, whats the best way to purge the system?
Reply With Quote
  #7  
Old 05-17-2017, 02:54 AM
Rimrock Rimrock is offline
Wannabe
 
Join Date: Jul 2013
Location: Western NO
Posts: 355
Rimrock is on a distinguished road
Default Re: eagle mach parts

Quote:
Originally Posted by honda3 View Post
Thanks for the help Ken, whats the best way to purge the system?
Air in the cylinder;
Put the hose(s) connected to the cylinder, directly into a tank/container, containing the correct grade of oil, and drag the piston in and out some times until all air is out, and the cylinder is fully filled with oil.

Generally check all fittings/hoses, that air is not let into the system

With magom, be sure to use proper grade of oil, very thin. Magom original oil. (grade 15 possible, but not known exactly what they use)
Reply With Quote
  #8  
Old 05-17-2017, 06:29 AM
Rimrock Rimrock is offline
Wannabe
 
Join Date: Jul 2013
Location: Western NO
Posts: 355
Rimrock is on a distinguished road
Default Re: eagle mach parts

I've not ordered parts for the RC4WD machines directly from the producer, Eagle /mr Tang, but it's a possibility I guess, even if one have not bought the machine from them in the first place. As a dealer, I get a better deal purchasing the machines via RC4WD, than directly with Eagle, so I prefer getting everything through them. but as private customer, might be a difference. A customer had some gears broken in one of the track motors of his 360L, and we got the via RC4WD customer service in a couple of weeks. Shipped directly from the producer in China, Eagle. I guess I would advice to get parts through where you bought the machine, RC4wd, or your local dealer, if not bought directly from Eagle. RC4WD can get the spare parts on needs buy contacting them, picture helps a lot. They just lists/ keep in stock a few of the most common in their web shop. E.g cylinder gaskets is a typical thing that will wear, especially the cylinder rod seal, same for any brand of machine. Starts leaking oil at the rod seal. Often just enough to change that particular seal, it's a standard 1.5mm thicknes o-ring, 7-8 mm inner diameter, avaiable at ebay and so on. Or optionally purchase a complete gasket kit, as rc4wd typically will offer

Last edited by Rimrock; 05-17-2017 at 06:47 AM.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:33 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.