|
Highway Trucks and Trailers On road trucks and trailers single and twin axle trucks. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Re: Classy Shak
Brian unless I cut a hole in the floor of the sleeper and put the motor and 3 spd there, I don't have the room. the floor on my cab is flat. and about 1/4" above the frame rails.
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Mike "DREAMWEAVER" Johnson To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. RIP FreddyGearDrive 2-12-59/12-19-11 Rims and Tanks by ihbuilder / Grill and Visor by Brian in PA / Mirrors, Front and Rear Bumper, Back of Cab Lights, and Steering Arms by tc1cat / Fenders by Stylin n Profilin / Frame Rails by The Late Freddy Gear Drive |
#2
|
||||
|
||||
Re: Classy Shak
Quote:
Brian |
#3
|
||||
|
||||
Re: Classy Shak
Quote:
The main thing I am asking is what motor. I have no idea what 540, 775 ect means. Here is a link to the place where Rick said he got the motor and the gear box for the yellow zonker but they don't have the combo that he got any more.. But these are the gear boxes I was thinking about. Rick said he had a 25:1 in the zonker.. http://banebots.com/c/PLANETARY
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Mike "DREAMWEAVER" Johnson To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. RIP FreddyGearDrive 2-12-59/12-19-11 Rims and Tanks by ihbuilder / Grill and Visor by Brian in PA / Mirrors, Front and Rear Bumper, Back of Cab Lights, and Steering Arms by tc1cat / Fenders by Stylin n Profilin / Frame Rails by The Late Freddy Gear Drive Last edited by Dreamweaver; 11-23-2011 at 01:34 AM. |
#4
|
||||
|
||||
Re: Classy Shak
I could use some help here guys... If you have a link to a site where I can find motors and gearboxes please post them.
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Mike "DREAMWEAVER" Johnson To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. RIP FreddyGearDrive 2-12-59/12-19-11 Rims and Tanks by ihbuilder / Grill and Visor by Brian in PA / Mirrors, Front and Rear Bumper, Back of Cab Lights, and Steering Arms by tc1cat / Fenders by Stylin n Profilin / Frame Rails by The Late Freddy Gear Drive |
#5
|
||||
|
||||
Re: Classy Shak
540 cans are the stock size the Tamiya kits come with. Plain silver can motor cheap and you can get them everywhere. I like the tamiya three speed with gear reduction/low count pinion. I ran mine with stock can and pinion with 4:1 on 3S lipo and was still pretty quick. I limited throttle on my radio a bit in fwd and lot for reverse.
|
#6
|
||||
|
||||
Re: Classy Shak
Quote:
Thanks.. No room for the 3 spd. I built the truck planning on using a motor and gearbox that Rick (Roque) used but the link he sent me a long time ago don't work anymore. I got it all figured out thanks to TC... I will be using a 540/55t with the RC4WD Disruptor. That should get me closer to the speeds I want.
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Mike "DREAMWEAVER" Johnson To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. RIP FreddyGearDrive 2-12-59/12-19-11 Rims and Tanks by ihbuilder / Grill and Visor by Brian in PA / Mirrors, Front and Rear Bumper, Back of Cab Lights, and Steering Arms by tc1cat / Fenders by Stylin n Profilin / Frame Rails by The Late Freddy Gear Drive |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|