Needfull Things Part 1 ALU Thermo Bottle in 1:14

Servus
Caution!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Never work at a rotating Machine if you are not shure what you are doing.
It can be dangerous!!!!!!

Fresh warm Coffee,I like it.
So dont let your Driver work without Coffee.


First,cut a piece of 1,5cm from a 5mm solid round Alum.


Put it into your Drillstand(Ihave no Lathe)

With a File you can Form the Top of the Bottle.

With a Saw you cut a small Ring into the Body.


Turn aruond the Bottle and form the Bottom in the same Way.
Take some Sandpaper and hold it to the rotating Bottle

Do it again with a finer Paper.

After all you can polish it carefully!!!

Your Bottle is ready





Do you like some Plumcake and Coffee??
Gruss Michael

[Fireman700]

Great accessories Michael

[Espeefan]

Very nice, and simple too! Thanks for sharing.

[Stuff]

very nice! looked like a .22 bullet before you added the black line! very ingenious!!

Originally Posted by Stuff

very nice! looked like a .22 bullet before you added the black line! very ingenious!!

Thats what I thought when I had the first one in my Hands.
Maybe a good Idea to make some from solid Silver............

Michael

[Espeefan]

Perhaps you should make a little handle on the side of the thermos body, and then everyone would know it's not a .22 round.