Hoarder Special!

[DieselKid]

Originally Posted by RCP57

Well Alex, it's a pretty big secret.... Wait for it.... wait for it... Nah, I'm just messing with you. The flaps are just glued on the rigid mounts at the back. The front's are pnched and glued into the copper. I wasn't sure if it would work but I didn't want to drill holes so I tried it. I used a flexible CA type glue and it seems to be working well. Having said that I have yet to back into a dirt pile and spin the tires against the flaps like on the dump trucks. That may just pull them off.

Haha, thanks for the info buddy! Yeah I'm glad you mentioned that about backing into a pile, something to take into consideration.....that's usually what kills them on the 1:1s!

-Alex

[RCP57]

I had to let this one go outside for a tinkle today. It pumps a good amount of water now. Just about right I would say.

http://youtu.be/Acb7J5H3EuE

This is one pass up and back.



And this is a single pass going as slow as I can.



A couple pictures of it all pumped out. It ran through about 6L of water in around 5 minutes.