Brushless Track Upgrade Kit

[stevec]

Hi can someone help me out with the wiring for the 1/12 Earth Digger Excavator Brushless Track Upgrade Kit lots of wires

[Rimrock]

Each motor has 3 wires that will be going separately via the swivel all the way to the brushless regulator, one for each motor. So totally 6 wires through the swivel to the 2 regulators. Doesn't mater how these 3 wires are mixed, just change around 2 wires to get the motor running in opposite direction. Each regulator has a + & - wire, for the battery. Than the wires from the regulator to the receiver.
DON'T connect wrong +/- regulator cables on the to the battery => game over.

[stevec]

Thankyou Rimrock will get back if it works

[stevec]

well well work first time thank to you Rimrock top man thanks mate

[Cooper]

I had that system on mine, went back to the original. The upgrade I got was better suited for 7.2 volts , I was running my system on 12 (3s) hope you have better outcome than I did.

[61pete]

I can't say i follow. The slip ring has 3 red wires and 3 black. Do all the red wires go to one motor and all the black to another? Could you possibly provide a wiring diagram?