LilGiantsConstrCo

[Lil Giants]

Originally Posted by bigford

wow your guts look just like the kats!! now i don't feel so bad
after seeing coopers 4200 all plumbed and routed neatly..LOL

Better clean your glasses... bigger components, 400ml oil tank & 6 esc's don't leave much room for "routed neatly"... besides that, mine works & yours rides around on a trailer.

Originally Posted by JAMMER

Hi Joe you swing ring looks a little chewed up. Ed

It's a thick crown gear, the bottom of motor pinion is flush with bottom of crown gear, it's the set screws of motor pinion that mark up top of crown gear a wee bit, can't push it up any further & don't want to take any 'meat' off the pinion.


Still finding some big rocks along the way...



Put the tailgate on the pup, 5 scoops of the bucket to heap it up... surprising how much drag it is for the B50 climbing out of the hole, the tires are flexing a lot & a bit of slippage.



Measured the deepest point, it's 63 inches... could be out of a job by Spring!



Outside view, where the tape measure sits is end of tunnel, approx. half way... the house cement foundation is about 20 inches thick.