Custom Front End Loader Build

[CustomCrawlerz]

CAD First Look Front End Loader Main Arm Assembly with Bucket

[CustomCrawlerz]

Main Arm Right Side 1.

Main Arms Left/Right Assembled.

[CustomCrawlerz]

Bucket Fabrication 1

Bucket Fabrication 2

Bucket Fabrication 3

Bucket Fabrication 4

Bucket Fabrication 5

Bucket Fabrication 6

Bucket Fabrication 7

Bucket Fabrication 8. With Mounting Tabs

Bucket Fabrication 9. With Mounting Tabs Rear View.

[CustomCrawlerz]

Bucket Dump Arm View 1

Bucket Dump Arm View 2

[CustomCrawlerz]

Assembled Main Arms. Bucket Mounted. Dump Arm Connected 1

Assembled Main Arms. Bucket Mounted. Dump Arm Connected. Operating Height 1

Assembled Main Arms. Bucket Mounted. Dump Arm Connected. Operating Height 2

Assembled Main Arms. Bucket Mounted. Dump Arm Connected. Operating Height 3

Assembled Main Arms. Bucket Mounted. Dump Arm Connected. Operating Height 4. Size Comparison to Tonka OEM Bucket.

[CustomCrawlerz]

Cad .pdf View of the Cutter Bar for the Bucket on the Loader (x3)

[FabOne]

GREAT job!! Keep posting!

-Terry

[CustomCrawlerz]

Quick CAD Draw up of a frame to go with my main bucket assembly. I have made a small change to this already, as I noticed a problem with the bucket all the way down here.

This is a view with the Bucket lifted all the way up and dumping.

[thetractorfan]

is the machine going to be hydraulic?

[CustomCrawlerz]

Originally Posted by thetractorfan

is the machine going to be hydraulic?

The initial thought is no, as per cost. But that may change if I can get my hands on a kit for the right price.

[thetractorfan]

if you can afford hydraulics, I would recommend it. Linear actuators are also a good idea. Is the wheel loader going to have a transmission?

[CustomCrawlerz]

Originally Posted by thetractorfan

if you can afford hydraulics, I would recommend it. Linear actuators are also a good idea. Is the wheel loader going to have a transmission?

I was thinking linear actuators for the arms. I was not planning on running a transmission. I was planning on running 4 planetary Gearmotors. One direct on each wheel. I already have them figured out and they will go inside the axle tubes.