Rc4wd 870k wheel loader unboxing and review.

[Rimrock]

One can count the tube as the fill line, say the bottom - half way up the tube.
If one need to put the machine on the side, don't forget to temporary seal off the air intake hose next to the filler tube) A suitable self tapping screw will do

[TheBennyB]

Originally Posted by Rimrock

One can count the tube as the fill line, say the bottom - half way up the tube.
If one need to put the machine on the side, don't forget to temporary seal off the air intake hose next to the filler tube) A suitable self tapping screw will do

Right on, thought that was the case. Ended up taking around 40Ml to get to the bottom of the fill tube. Thanks.

[liftmys10]

Originally Posted by TheBennyB

Right on, thought that was the case. Ended up taking around 40Ml to get to the bottom of the fill tube. Thanks.

Check again once you cycle thru each cylinder.