Newbie Scratch Build - D575A Dozer

[Originalrob]

For a bit of a break from all the hand cranking operations on the mill and lathe i also started on 3D printing the cab and top elements that had no structural importance and were just for show.







the railings are just 2mm steel rod and bend/silver soldered together. really happy how these worked out!

my original idea was to weld all the elements of the undercarriage together ( bolted together first) and then two pack fill and sand/undercoat:







Filled and primed :





Yellow colour is just a filler/primer for the ABS prints and is used an acid etched primer for the steelwork