|
|
|||||||
| Highway Trucks and Trailers On road trucks and trailers single and twin axle trucks. |
 |
|
|
Thread Tools | Display Modes |
|
#1
12-17-2020, 05:10 PM
|
||||
|
||||
Introduction
I am Jim and I'm new to RC trucks. I'm in the process of building a replica of the 1984 KW W900 that was the only truck that I bought new back when I was an owner-operator. I just recently found this forum as a much-needed resource for information to help my build.
I'm a little disappointed that this forum is still using image hosting sites to post pics rather than direct posting like other forums have gone to but I guess I can go back to the old ways to post here. Here is the truck I am trying to replicate. 
|
|
#2
12-17-2020, 05:48 PM
|
||||
|
||||
|
Re: Introduction
Here is some of what I have done so far.
Converted the suspension to 8 bag air ride like I had,   Replaced the chrome plastic wheels with metal ones.  Cut the hood off and modified to look more like the KW fiberglass hood.  Built a firewall.  Purchased a 1/16th 3D printed 3406 Cat engine. 
|
|
#3
12-18-2020, 07:31 AM
|
||||
|
||||
|
Re: Introduction
Welcome to the board
This looks like it's going to be a very cool and ambitious build!
__________________
What do ya mean "Cars are neither Trucks or Construction"? It's still scale, and i play fairly well with others, most of the time...
|
|
#5
01-01-2021, 09:05 PM
|
||||
|
||||
|
Re: Introduction
Thanks for the complements, I'm progressing slowly but still making progress.
I have the hood almost ready to paint so I decided to check the fit of the KW grill I bought.  I got the 3D print lines sanded smooth, painted most of the engine, and started assembling but I need to get some paint for the turbo and exhaust maniflold before I can go any farther.  
|
|
#7
03-01-2021, 11:23 AM
|
||||
|
||||
|
Re: Introduction
An interesting build to follow!
__________________
Emil G | MFZ Blocher Fendt 926 | RC4WD Volvo EC480 excavator | Carson LR 634 | Kenworth 6x6 hauler | Kenworth 6x6 dtrk My channel: To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Construction site on Facebook: To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Pictures on Instagram: To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
#8
03-01-2021, 06:20 PM
|
||||
|
||||
|
Re: Introduction
Thanks guys, I haven't taken any new pics yet but I decided the wheelbase was too short so I ordered new blank frame rails and I'm in the process of drilling and tapping the holes and of course I managed to break the tap so now I'm waiting for the new 2mm tap to come.
I also painted the hood and found that there were scratches that my old eyes couldn't see in the primer so I had to start over on that as well. Good thing I'm retired and have lots of time. LOL!
|
|
#10
03-05-2021, 03:52 AM
|
||||
|
||||
|
Re: Introduction
Quote:
|
|
#11
03-09-2021, 08:26 PM
|
||||
|
||||
|
Re: Introduction
I finally made some progress on some of my build.
I decided that the wheelbase of the King Hauler is too short to look like my full size so I started over on the chassis build after ordering new blank frame rails. It is taking much longer than I thought to drill and tap all the holes in the rails so I went to work on getting the hood painted and assembled except for the LED lights that will go in later. The Kenworth emblems that I ordered for the hood sides are very nice and look To be cut from polished stainless steel.  I have most of the detailing done on the engine as well.  
|
|
#12
03-13-2021, 09:41 PM
|
||||
|
||||
|
Re: Introduction
The new longer chassis is coming along. I just have to drill and tap the holes for the front suspension and front cross member along with cutting to length. I also got my real metal fuel tanks polished.
  I bought a pair of KW style steps/tool and battery boxes made from aluminum. I sanded the machine marks out so I can polish the ends and drilled holes in the bottom step to kind of replicate the grating step that was on the KWs. I will be glueing some stainless deck plate to the part that was the door/step part to get the correct look. 
|
|
#16
06-28-2021, 07:35 PM
|
||||
|
||||
|
Re: Introduction
I haven't posted progress in a while as I have been busy with yard work and other projects so here are a couple of pics.
I have gotten the hood hinge location where I want it finally.   I found some KW style door handles and installed them.  The engine detailing is almost complete.  
|
|
#18
06-29-2021, 11:25 AM
|
||||
|
||||
|
Re: Introduction
Great job so far!! Looking forward to more.
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
#20
07-01-2021, 10:55 AM
|
||||
|
||||
|
Re: Introduction
Engine detailing looks really good! Great workmanship all over this build
__________________
What do ya mean "Cars are neither Trucks or Construction"? It's still scale, and i play fairly well with others, most of the time...
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
