Oil Field Prim Mover KW 396

[Tamiya Cowboy]

Ok here is how I am making the winch work. i am mounting one of the good scale German winches. the winch that started all the other winches nice thing about these is they will pull ALOT of weight with out breaking.




Then I mounted a fair led in the top of the deck for the cable to come threw and wrapped the cable around the drum. So when you run the winch teh drum will turn .



[/B]

[Tamiya Cowboy]

Now i still have alot of detail to go plus the trailer still needs to be built.

[Tamiya Cowboy]

[Tamiya Cowboy]

I got a little more detail work done late last night on the rig. I made a movable 5th wheel and 5th wheel ramps.




And as you can see in the picks above I also added a RC4WD King Kong hook.

Then I added a edge for the chain box out of brass angle.

[Tamiya Cowboy]

Then I made square blinkers out of 3/8 square tube and cut the King hauler amber light to fit. And I also added brush guards out of brass over the blinkers.


I got the tranny mounted. I used some milled shock mounts for the F350 they were the perfect size and hole pattern.



I also got 2 of the 3 drive shafts in my other one did not show yet.



Then I got the steering done. I used bigger alum tie rods and emaxx ball joints and I added alum black drive hubs and junked the plastic ones. I also used a 645 for the steering and a 5626 for the shifting.

[Tamiya Cowboy]

Then i thought a set of these were fitting since it would be 11.4 Lipo and a 55 turn with a 8 tooth.



And the rig is getting a full set of custom milled hubs

[Tamiya Cowboy]

I got a little time this weekend to start on the trailer of the Oil Field Rig. Stock tamiya flat bed trailer with F350 leafs and CR01 wheels and tires I have added a rub rail and the roller on the nose of the trailer I still have the rear plate and roller left to do and leg and lights.