All aboard..

[skl1cent]

she will def be a pusher jus like the real deal

[skl1cent]

both sides now complete

[skl1cent]

when it comes to making a turn every bit counts specially for a bus this long

with shocks, no good


without shocks, yep yep thts what you want

[grumpygrady]

for the siding you can make your own if you have a lathe
i used to make the dies for domed silver wire out of steel
but with thin alumium you could maybe use alumium round stock
anyway make a cylinder about two to three inches in diameter your choice
cut them both the same length IE i use some 2" stock and cut it four inches long and drill a hole clear though them both but with one hole smaller
now you need to draw up what the finished siding would look like from a end
IE ^^^^^^^^ but in your scale lol then chuck up one roller and make a positive
that is the one that has the raised bumps on it just go slow and check and recheck it
when its done do the other roller but i negative and this one is harder as it needs to be
as close as it can to fit
now make a frame and mount them so the top one adjusts up and down
put the rollers on axles and make the top one turn with a crank

i know i know it seems like a lot of work but if you just sit and think about it and you are handy it will click
or if you have a mill you can cut two plates and use a arbor press

sold and/or gave most of that stuff away when we moved down to Florida so i can't show pictures but will look on the inter-net

grumpy

[skl1cent]

heheh welll I really wish I could work with metal, but I dont have metal working machines or metal to work with LOL which sucksss But if I did, I could make some great stuff since I already know how to do scale drawings of things n such would be aawesomeeeeeee maybe 1 day will be a while till then lol

[skl1cent]

here is moreee!

think i need some spacers for the front axel to pull the wheels out a bit more its very close to scale
but I want them to stick out a bit further and then ill be 100% satisfied

[CrimsonCorsair]

Amazing. And fast!

[Stuff]

wow!

[Bigrigger]

Looking good Silvio!!!

[Tamiya Cowboy]

This is coming along great..Keep up the great work at the rate you are going you'll be done soon..

[Finster]

Nice job so far and really fast! You should put a sound system in it and play Weird Al's "Another one rides the Bus" when it's finished.

I couldn't help myself.

http://www.youtube.com/watch?v=oh99A86HraY

[mazdaparts]

Instead of wideners why not widen the axle itself. You seem to be a styrene master, and I'm sure you could build an extension to widen the axle.

[russisloud]

i'd have IHBUILDER make you some spacers to go between the hub and the rim. he did the rims right? should have no problem matching them up.

[Izzy]

I'd leave the front alone..... Themany I have seen they are tucked in just like you have...... I like the style bus you chose.....

A build of a different nature for sure.....

[skl1cent]

thank you very much guys I hope to have more updates for you sooooon now its the real hard part of the bus LOL making the front n rear LOL

[RAIDERS]

looks real good..

[skl1cent]

Phase 1 COMPLETEEEE 1 of the most important steps in this build
now comes the hard part LOLL!! OH MAN!!!! you guys havent seen nothin yet!

[d.k.v]

Silvio shes looking really sweet. Dont stop now

[Cossett]

Looking good mate she is coming along well once the outside is done the fun part begins doing the interior so where are all those seats coming from and where will the motor be placed keep the pic's coming Silvio

Cheers Tracy