Mug Shots! - Page 4

daycab · #61 03-15-2011, 09:59 PM

Here is my mug shot it was taken at a build weekend my son fhhhstix had in our shop.

George

doodlebug · #62 04-03-2011, 03:29 PM

Here's my mugshot from Conexpo/ConAg last month.
Later, Neil#2 aka doodlebug.

grumpygrady · #63 04-05-2011, 02:25 AM

Quote:

Originally Posted by 9W Monighan

does the mule run?
great little buggy as long as you are not using it everyday all day lol

9W Monighan · #64 04-05-2011, 09:34 AM

Yes It runs great. Sometimes it is a bit hard to start but if you know the technique it works every time. Sometimes the hydraulic lifters don't pump up right away but after a few minutes they come up. I put a new rebuilt engine in not long after I bought it in 2007. The original wouldn't had blown up if I would have seen the mouse nest hidden on the LH cyl head overheating it and popping the exhaust seat out of the head.

We were up to camp the middle of February and it started after 12pulls. I wasn't run since Thanksgiving and it was sitting in a steel sea container.

SmallHaul · #65 04-05-2011, 10:30 AM

I can confirm that it runs great! Steve's son Mike and I rode around on it at the the Brownsville 1:1 show and that thing climbs like you wouldn't believe. There was a real steep, loose pile of dirt that we drove up and not only did it make the climb, it never even lost traction the whole way up the hill.

YoungGunz · #66 08-16-2011, 01:27 PM

Well now you can put a face to a name.......

B-Train Hauler · #67 08-22-2011, 05:37 PM

Hi! Ok, it's me with my 1:1 King Hauler!

See you!

Gaetan

Dreamweaver · #68 08-22-2011, 09:22 PM

This is the most recent shot of my ugly mug... This is how I went to the fair this year.

~Mike~

Dieselholic · #69 12-14-2011, 04:47 PM

Well I just joined but here's a couple pictures of me

9W Monighan · #70 12-14-2011, 05:41 PM

Quote:

Originally Posted by Dieselholic

Well I just joined but here's a couple pictures of me

You look like my younger son working on his 2000' Cummins. In the past month we put a 4'' staight pipe on , new ball joints, 2.5'' lift under the coils. When he gets paid he needs some tires. Probably the same 285x75's again.

Dieselholic · #71 12-14-2011, 05:58 PM

Quote:

Originally Posted by 9W Monighan

You look like my younger son working on his 2000' Cummins. In the past month we put a 4'' staight pipe on , new ball joints, 2.5'' lift under the coils. When he gets paid he needs some tires. Probably the same 285x75's again.

Is his an automatic? Mines an 01 regular cab long box with an NV5600 6 speed. I've had it for about 4 years now and it has a MBRP 4 inch straight pipe, cold air intake, BD boost fooler, FASS 150HD, Superchips Flashpaq, and Autometer Ultralite boost, EGT, and fuel pressure.

Does it have an aftermarket lift pump on it yet?

9W Monighan · #72 12-14-2011, 06:34 PM

It's a 5sp. The guy he bought it off of in July said there were 250hp injectors? in it. Runs pretty good but can't touch my Duramax. He doesn't want to put too much in it yet. It does have 215,000 miles on it. I don't have any current pics with the front lift but it made the truck look better sitting level. We probably should move this to the 1:1 topics

fhhhstix · #73 12-14-2011, 09:21 PM

Quote:

Originally Posted by 9W Monighan

It's a 5sp. The guy he bought it off of in July said there were 250hp injectors? in it. Runs pretty good but can't touch my Duramax. He doesn't want to put too much in it yet. It does have 215,000 miles on it. I don't have any current pics with the front lift but it made the truck look better sitting level. We probably should move this to the 1:1 topics

Does you son always give the photographer the bird.

Travis