RCLogger

[RCLogger]

Originally Posted by RCLogger

You see there is three holes on each side of the swing motor. That is what the house main plate is attached to..

http://servocity.com/html/spg785a_top_mount.html

The servo city drive I get at 6 rpm, then invert it, the gear is mounted solid to the undercarrage.

greg

[FlyingBeagle]

Thank you so much for sharing that part, I have been scratching my head for quite a while on how to build the turntable. That part is perfect.

Thanks again

[Michael S]

Do you have countinius travel with that??

[RCLogger]

Originally Posted by Michael S

Do you have countinius travel with that??

If you checkout my thread starting on #370 you will see how I built my continues rotation.. ( slip ring ) The wires come up through the centre shaft of the swing motor and then solder to the brass rings...

greg

[Michael S]

Originally Posted by RCLogger

If you checkout my thread starting on #370 you will see how I built my continues rotation.. ( slip ring ) The wires come up through the centre shaft of the swing motor and then solder to the brass rings...

greg

I mean does the kit from servocity have countinues rotation? or have you modified it?

[RCLogger]

Originally Posted by Michael S

I mean does the kit from servocity have countinues rotation? or have you modified it?

Continues