LilGiantsConstrCo

[Lil Giants]

That's probably what it is then Nathan, the Sabertooth is providing the BEC. I'd rather use the E-Flite's BEC, but I have found that disconnecting the red wires from the Sabertooth rx leads, then the Sabertooth does not work.

[fhhhstix]

Originally Posted by Lil Giants

That's probably what it is then Nathan, the Sabertooth is providing the BEC. I'd rather use the E-Flite's BEC, but I have found that disconnecting the red wires from the Sabertooth rx leads, then the Sabertooth does not work.

If you are using a separate BEC then the red wires from the sabertooth being unhooked should be fine. My CAT tractor, Track loader, and dozer all use a separate BEC and the red wires are pulled from the plug and the sabertooths work just fine. The sabertooth I bought for the CAT tractor came with an external BEC and the red wires are not even in the harness going to the esc just the ground and signal. I do know one thing for sure never unhook the ground or the signal wire has nothing to get a base reading from they work together.


Travis