Spektrum DX10 system fault

[apfubar]

I would suggest upgrading the firmware on the 10t if you haven't already.

Note: you should backup you models to the SD card before doing so. You may also need to re-bind the models.

Cheers,
AP

[titandigs]

Originally Posted by apfubar

I would suggest upgrading the firmware on the 10t if you haven't already.

Note: you should backup you models to the SD card before doing so. You may also need to re-bind the models.

Cheers,
AP

I have upgraded the firmware and it has solved the problem,
Now it takes about ten seconds for the transmitter to boot up.
Prior to the firmware upgrade it would boot up in about 1 second.
It's not a big problem but its not the same as it was out of the box any ideas?
Thanks Paul

[apfubar]

Paul,

Mine takes a while to start up as well, not 10 seconds though.

I might try and ask Spektrum to comment on the boot time (it does feel long).

I will also check my DX8 and see if it is the same.

Cheers,
AP