|
Highway Trucks and Trailers On road trucks and trailers single and twin axle trucks. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Needfull Things Part 1 ALU Thermo Bottle in 1:14
Servus
Caution!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Never work at a rotating Machine if you are not shure what you are doing. It can be dangerous!!!!!! Fresh warm Coffee,I like it. So dont let your Driver work without Coffee. First,cut a piece of 1,5cm from a 5mm solid round Alum. Put it into your Drillstand(Ihave no Lathe) With a File you can Form the Top of the Bottle. With a Saw you cut a small Ring into the Body. Turn aruond the Bottle and form the Bottom in the same Way. Take some Sandpaper and hold it to the rotating Bottle Do it again with a finer Paper. After all you can polish it carefully!!! Your Bottle is ready Do you like some Plumcake and Coffee?? Gruss Michael |
#2
|
|||
|
|||
Re: Needfull Things Part 1 ALU Thermo Bottle in 1:14
Great accessories Michael
|
#3
|
||||
|
||||
Re: Needfull Things Part 1 ALU Thermo Bottle in 1:14
Very nice, and simple too! Thanks for sharing.
__________________
Nathan |
#4
|
||||
|
||||
Re: Needfull Things Part 1 ALU Thermo Bottle in 1:14
very nice! looked like a .22 bullet before you added the black line! very ingenious!!
__________________
Rc's are like pringles. You can't have just one!! my YouTube is - To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Subscribe!! My Facebook - To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#5
|
|||
|
|||
Re: Needfull Things Part 1 ALU Thermo Bottle in 1:14
Quote:
Maybe a good Idea to make some from solid Silver............ Michael |
#6
|
||||
|
||||
Re: Needfull Things Part 1 ALU Thermo Bottle in 1:14
Perhaps you should make a little handle on the side of the thermos body, and then everyone would know it's not a .22 round.
__________________
Nathan |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|