Construction Equipment Radio

[JAMMER]

Stu the DX18 will do 18 channels 9 in the radio and 9 on a expander it's all plug and play. There is also one other thing about this radio it keeps you up dated with the latest info. You just go on site down load and transfer the info to the SD card that comes with the radio. Ed

[Stuart]

Originally Posted by JAMMER

Stu the DX18 will do 18 channels 9 in the radio and 9 on a expander it's all plug and play. There is also one other thing about this radio it keeps you up dated with the latest info. You just go on site down load and transfer the info to the SD card that comes with the radio. Ed

Thanks Ed, do you know if you can bind 2x receivers to the same model memory on the DX18 or DX10?
I'm thinking 1x in a truck and 1x in a trailer maybe for ramps and stuff rather than having wires between the two.

I do like the Spektrum radios, I have a dx7s at the mo with quite a few receivers so would make sense to stick with them.

Don't mean to highjack this thread

Stu

[apfubar]

Originally Posted by Stuart

Thanks Ed, do you know if you can bind 2x receivers to the same model memory on the DX18 or DX10?
I'm thinking 1x in a truck and 1x in a trailer maybe for ramps and stuff rather than having wires between the two.

I do like the Spektrum radios, I have a dx7s at the mo with quite a few receivers so would make sense to stick with them.

Don't mean to highjack this thread

Stu

Yes the spektrum gear will support this, place both rx's in bind and the bind the radio.

The receivers must be the same series, ie. dsmx or dsm2. You can't bind dsm2 and dsmx recievers(at the same time to the same model memory in the tx).

Cheers,
Ap
P.s. I would not recommend the 10t, as the 18 has more functions for less $.