TATRA 15821 CD Capo 8 x 8 truck .

[JZA80]

nice work, i got one too and not yet have time to assembly it, follow this thread can help me later on. thanks for post this up.

[Rakthi]

Well found out why the front axle was not smooth …. Half the screws were not tightened inside the differential case - see picture -… whoever did the pre-assembly wasn't with it … I guess I will take it all apart to check.

Well I can not fault them on the machining on the parts. Everything is beautifully finished and fits perfect. A lot of thought went into this.

Still, having loads of fun and that's what it is all about.

[Rakthi]

Not only was front axle loosely assembled, they didn't put the rubber band on the locking mechanism of the differential … No wonder the whole thing jammed up.



Ended up taking the whole assembly apart.

Balance: 5 cross threaded screws, and about 50% not tightened. The actual gear mechanisms were properly assembled.



The tool provided by them is perfect for removing and re-inserting the bearings.

Most difficult part in reassembling was the metal clamps that holds on the rubber boots.

The whole thing, from start to finish took me about 8 hours.